KAREI-JH-AP
Product Model: KAREI-JH-AP
KAREI-JH-AP Series Absolute Rated Jumbo Highflow Pleated Filter Cartridges are designed for high-flow and high-pressure filtration applications. Manufactured with multi-graded polypropylene depth media, the cartridge provides absolute particle retention from 0.1 to 70 μm, high effective filtration area of more than 5.0 m² per 20-inch cartridge, high flow rates, low pressure drop, and superior dirt holding capacity. Thermal bonding without surfactants, binders, or adhesives, combined with a non-woven polypropylene drainage layer, helps minimize extractables and fiber shedding.
Overview
KAREI-JH-AP Series Absolute Rated Jumbo Highflow Pleated Filter Cartridges are designed for high-flow and high-pressure filtration applications. Manufactured with multi-graded polypropylene depth media, the cartridge provides absolute particle retention from 0.1 to 70 μm, high effective filtration area of more than 5.0 m² per 20-inch cartridge, high flow rates, low pressure drop, and superior dirt holding capacity. Thermal bonding without surfactants, binders, or adhesives, combined with a non-woven polypropylene drainage layer, helps minimize extractables and fiber shedding.
Engineered and supported by Rojanapat Engineering, this product is delivered with full technical consultation, installation guidance, and long-term after-sales support tailored to your process.
| Model | KAREI-JH-AP |
| Media | Polyvinylidene fluoride |
| Filter Type | Absolute Rated Jumbo Highflow Pleated Filter Cartridge |
| Filter Media | Polypropylene (AP) |
| Filtration Rating | Absolute Rated |
| Absolute Micron Rating | 0.1, 0.2, 0.3, 0.45, 0.6, 0.8, 1, 3, 5, 10, 20, 50 & 70 μm |
| Filtration Area | >5.0 m²: 20-inch Filter Cartridge |
| Nominal Length | 508 mm (20") / 1016 mm (40") / 1524 mm (60") |
| Outer Diameter | 152 mm (6-inch) |
| Filter Type | • V: Vertical • H: Horizontal |
| Supporting Material | Non-Woven Polypropylene Micro-Denier Fibers |
| Inner Core, Cage & End Adaptor | High Strength Pure Polypropylene |
| Sealing Technique | Thermal Bonding |
| Gasket / O-Ring Options | EPDM / Viton / Silicone / Teflon / FEP Encapsulated Viton |
| Maximum Forward Differential Pressure | 4.1 Bar (60 PSI) at 25°C |
| Maximum Reverse Differential Pressure | 4.1 Bar (60 PSI) at 25°C |
| Maximum Operating Temperature | 90°C at 2.1 Bar (30 PSI) |
| Change-Out Differential Pressure | 2.4 Bar (35 PSID) |
Quick Inquiry
Send us a quick message about this product and our team will contact you.
